-
25th October 2019, 09:02 AM
#1
Chen Hsong Injection Molding Machines
Hi All,
Our company bought 6 new machines Chen Hsong 120, 180 & 560 all with CE mark this year. But all machines were supplied without Mechanical Safety Device. We asked Chen Hsong why? The reply was: that's ok under European standard EN201:2009 for CE mark approval.
We are wandering if anyone has got the same problem with Chen Hsong IMMs?
Please share your experience.
And what’s your thoughts of Chen Hsong and this situation about Mechanical safety devices?
Thanks for your time.
IMMs maintenance crew
Aquaphor Co.
-
25th October 2019, 12:22 PM
#2
Re: Chen Hsong Injection Molding Machines
Hi,
You mean mechanical lock against the tool moovement when basic safety circuit is locked (front door open signal, for example)?
Is it really so, You don´t need that at the machine to get CE.
The worst would be if its there already installed and You will take it out from some reasons. Thats against legal regulations. Definitelly You would lost waranty and take all responsibility if anything happend.
J.
-
28th October 2019, 07:33 AM
#3
Re: Chen Hsong Injection Molding Machines
Hello Jendalf,
Thanks for comment. Yes, correct, we've meant the mechanical lock against the tool moovement. Please see attached photo for reference.
Now all is clear about CE and mechanical locks.
Thank you so much.
BR,
IMM maitenance crew
Aquaphor Corp.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules