-
5th August 2020, 04:19 PM
#1
milacron vt110
I have a vt 110 that the linear transducer for the injection is only reading 0.00 to 0.04 wont go any higher. Tried a known good one from a working machine. Still the same 0.00 to 0.04 any ideas on what could be wrong.
-
6th August 2020, 09:34 AM
#2
Re: milacron vt110
Input card reading the position from transducer.
-
12th August 2020, 03:12 AM
#3
Re: milacron vt110
i would test the wiring first, unless you have a spare dsp board in storage. Also make sure you have the MCL and the screenware ready, its always a roll of the dice when you power it down for any reason.
what controller is on the Machine?
-
16th September 2020, 07:28 AM
#4
Re: milacron vt110
May be the input number is wrong.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules